Our ElectricalServices.
LOW Electric LLC specializes in the jobs that demand a licensed, skilled hand. From panel upgrades and EV charger installs to pool wiring, poultry house electrical, and metal building wiring — Josh Herring brings 15+ years of experience to every project across Stanly County and beyond.
All Electrical Services
We focus on mid-scope residential and commercial work — the jobs that go beyond a simple fixture swap but stop well short of a full new-construction build. Every job is handled personally by Josh. Click any service to see full details.
Panel & Service Upgrades
Outdated or undersized electrical panels are a safety risk and a bottleneck for modern life. We replace panels and upgrade service entrances to 200A or higher — code-compliant, safe, and built to last.
EV Charger Install & Service
We install and service Level 2 EV charging stations for homes and businesses across Stanly County, Concord, Indian Trail, Waxhaw, Matthews, and the Charlotte metro. Every install is permitted and code-compliant.
Pool & Hot Tub Wiring
Above ground pools and hot tubs require dedicated circuits, GFCI protection, and correct bonding — and NC code is strict. We wire receptacles and circuits for pools and spas correctly, every time.
Poultry & Turkey House Electrical
We perform service and repair work on the electrical systems that keep your poultry operation running — industrial fan wiring, ventilation controls, lighting, and circuits for chicken and turkey houses throughout Stanly County.
Metal Buildings & Detached Garages
Adding a residential metal building, workshop, or detached garage? We run all wiring from your home's main panel — lighting, outlets, 240V circuits, and more — to code and built for heavy daily use.
Wiring Additions & Troubleshooting
Adding a room, finishing a basement, or chasing a mystery breaker issue? We handle wiring for home additions and tackle complex electrical troubleshooting backed by 15+ years of hands-on field experience.
Panel & Service Upgrades
If your home or business is running on an outdated electrical panel — especially one that's 25 years or older — you may be dealing with safety hazards, frequent breaker trips, and electrical systems that simply can't keep up with today's demands. LOW Electric LLC performs full panel replacements and service upgrades throughout Stanly County and surrounding areas.
A service upgrade from 100A to 200A or higher isn't just about capacity — it's about safety, resale value, and the ability to add modern loads like EV chargers, central HVAC, or large appliances without constantly resetting breakers. Josh handles the full job: coordination with the utility, permit pulls when required, and a clean install every time.
- Full panel replacement — breaker box, main breaker, wiring connections
- Service upgrade from 100A to 200A or higher
- Service entrance cable and meter base replacement
- Utility coordination and permit management
- All work NC code-compliant — residential and commercial
EV Charger Installation & Service
Charging your electric vehicle at home on a standard 120V outlet is slow and inefficient. A Level 2 EV charger operates at 240V and charges most vehicles 5–8× faster — a full overnight charge instead of days. LOW Electric LLC installs and services Level 2 EV charging stations for homes and businesses throughout Stanly County and the greater Charlotte area.
Every installation includes a dedicated 240V circuit sized to your charger, proper grounding and protection, and a clean, professional finish. We coordinate permits where required and make sure your charging setup is ready for daily use. We also service and troubleshoot existing EV charger installs that aren't performing as expected.
- Dedicated 240V circuit from your main panel to the charger location
- Compatible with all major EV charger brands and models
- Indoor and outdoor installation — garage, driveway, parking area
- Residential and commercial installs — homes, multi-family, small business
- Service and troubleshooting of existing EV charger circuits
- Permitted and NC code-compliant every time
Water and electricity are a serious combination. Above ground pool and hot tub wiring requires dedicated circuits, GFCI protection, and precise bonding — and NC electrical code has specific requirements for all of it. Done incorrectly, pool wiring is one of the most dangerous electrical hazards around a home.
LOW Electric LLC handles pool and hot tub wiring correctly and safely. Josh understands the code requirements inside and out and ensures every installation meets or exceeds NC standards — whether you're setting up a new above ground pool, adding a hot tub or spa, or bringing an existing installation up to code.
- Dedicated circuits and receptacles for above ground pools
- GFCI protection — required by NC code for all pool and spa wiring
- Equipotential bonding — prevents electrical shock in the water
- Hot tub and spa 240V circuit installation
- Outdoor-rated wiring and weatherproof enclosures
- Inspection-ready, code-compliant installation every time
Poultry & Turkey House Electrical
In a poultry operation, electrical reliability isn't a luxury — it's critical. Ventilation fan failures, lighting outages, and control system problems in a chicken house or turkey house can result in significant losses in a matter of hours. LOW Electric LLC understands the urgency and the unique demands of agricultural electrical systems in Stanly County and the surrounding region.
Josh performs service and repair work on the electrical systems that keep your poultry houses running — from individual fan motors and contactors to complete circuit diagnosis and repairs. We work efficiently to get your systems back online with minimal downtime.
- Industrial ventilation fan wiring and motor circuits
- Contactor and controller troubleshooting and replacement
- Lighting circuit service and repair — chicken houses and turkey houses
- General electrical troubleshooting and circuit repairs
- Panel and service work for agricultural buildings
Metal Buildings & Detached Garages
A new residential metal building, workshop, or detached garage is a significant investment — and it needs to be wired right to be fully useful. LOW Electric LLC runs all wiring from your home's main panel to your new structure, including everything you need to make the space fully functional: lighting, general outlets, 240V circuits for equipment, and more.
Whether you're building a woodworking shop, a storage building, a mechanic's garage, or a general-purpose outbuilding, Josh will work with you to understand how you plan to use the space and design the electrical layout accordingly — not just the minimum required, but what will actually serve you well for years to come.
- Underground or overhead feed from home's main panel to the structure
- Sub-panel installation inside the building
- General purpose outlets — 120V and 240V circuits
- Lighting — LED shop lights, exterior lighting, switch control
- Dedicated circuits for welders, air compressors, or heavy equipment
- NC code-compliant — permit pulled when required
Wiring Additions & Troubleshooting
Adding living space to your home — whether it's a room addition, a finished basement, a sunroom, or a garage conversion — requires a complete rough-in and finish wiring job done to current NC code. LOW Electric LLC handles the electrical scope on home additions from start to finish, coordinating with your contractor or managing the electrical work independently as needed.
We also handle complex electrical troubleshooting — the frustrating, persistent issues that other electricians haven't been able to pin down. Breakers that keep tripping, outlets that don't work, lights that flicker, circuits that mysteriously lose power. With 15+ years of experience, Josh has seen and solved it all.
- Rough-in and finish wiring for room additions and home additions
- Basement finishing and garage conversion wiring
- Dedicated circuits for new appliances or equipment
- Breaker troubleshooting — persistent trips, overloaded circuits
- Outlet and switch troubleshooting — dead circuits, GFCI issues
- Flickering light diagnosis — fixture, dimmer, wiring, or service issues
Why LOW Electric LLC
Every service we offer is backed by 15+ years of real-world electrical experience — and performed personally by Josh Herring, the owner.
When you hire LOW Electric, Josh Herring shows up — not a crew of subcontractors. You get 15+ years of experience applied directly to your project, every single time.
Every job meets or exceeds North Carolina electrical code. Fully licensed and insured, giving you peace of mind that the work is done right and your property is protected.
Every estimate is 100% free and built on a straight assessment of what the job actually needs. No upselling. No inflated scope. What we quote is what you pay.
We focus on the jobs that genuinely require skilled, licensed electrical work — not minor fixture swaps, and not full new-construction builds. This keeps our quality and focus where it matters.
Based in Stanfield, NC — LOW Electric LLC was built to serve this community. Our reputation is built one job at a time, right here in Stanly County and the surrounding area.
We respond quickly to calls and messages, show up when we say we will, and keep you informed throughout the job. Reliability matters — and we treat it as non-negotiable.
Services FAQ
Request a Free Estimate
Tell us about your project and Josh will reach out promptly with a straight answer on what the job needs and what it'll cost. No obligation, no runaround.
Request a Free Estimate
Fill out the form and Josh will be in touch within 1 business day.
Thanks for reaching out. Josh will review your project and be in touch shortly — usually within 1 business day.
Need a faster response? Call 704-792-7442.
Ready to Get the Job Done?
Licensed. Insured. Local. Free estimates on every electrical project.
Request a Free Estimate Call 704-792-7442
Licensed and insured electrical contractor proudly serving Stanly County and surrounding communities in North Carolina.
CONTACT
© 2026 Low Electric LLC · Stanfield, NC · All Rights Reserved